Brass Rooster Weathervane

  • Model: CE1910100
  • Manufactured by: Clare Bell Brass


Add to Cart:

1" Scale miniature, solid brass, gold plated weathervanes.  These weathervanes will look great on any doll house, bird house, or craft project. They really work!


1 5/16" wide X 2 15/16" tall    33.3mm  X 74.6mm

The Directional is 2 1/16"  (52.4mm)

Weathervane Instructions


  1. Mark where you want your weathervane to be and drill a 1/8" (3.2mm) diameter hole X 7/8" (22.2mm) deep as straight down (vertical) as possible.

  2. Use a small amount of glue in the hole that you just drilled and push the weather vane shaft into it until it hits the shoulder on the shaft.

  3. Use a small amount of glue to secure the directional to the shaft.  Make sure you aim the compass points where you want them.  Let the glue dry before going any further.

  4. Hold the ball and the figure together and slide the post into the hole in the shaft. The top figure will spin freely.


Sort by Manufacturer

YANKEE best 5 shops for crafters